Skip to product information
1 of 1

Carr Lane

Carr Lane CLM-71420-HE | 24" Diameter x M10 Thread Hoist Eye

Carr Lane CLM-71420-HE | 24" Diameter x M10 Thread Hoist Eye

SKU: 93006204

Regular price $94.00 USD
Regular price $94.00 USD Sale price $94.00 USD
Sale Sold out
Shipping calculated at checkout.

UPC:

Weight: 118 Grams

Free Shipping on Orders Over $75

View full details

Hoist Eye 360

Hoist Eye 360 is a forged lifting eye that can be rotated 360 Degree after installation, to align with the pulling direction. This compact assembly features a specially designed shoulder bolt, which rotates freely in the precisely machined lifting-eye body and is held captive by a retaining ring. Unlike conventional lifting eyes, Hoist Eye 360 can be used at full rated load capacity when pulling at any angle 0 to 90 Degree from the bolt axis.

Application Information

These unique lifting-eye assemblies can be rotated freely after installation, to align with the pulling direction.

ApplicationInformation_CLM-71420-HE.jpg

Safety Precautions

Do not exceed rated load capacity. Do not work, stand, or crawl near the load of a Hoist Eye. Do not use a Hoist Eye to lift a load that can rotate while under load; Swivel Hoist Rings should be used for such loads. Do not shock load Hoist Eyes; instead gradually increase lifting of the load to minimize load shock. Do not force hooks or any other fittings into the eye; they must fit freely. Do not weld or machine Hoist Eyes, or perform any repair. Do not expose Hoist Eyes to extreme temperatures or environmental conditions, as this may permanently reduce load capacity. Periodic inspection of installed Hoist Eyes is highly recommended. Also see general Hoist Ring Safety Precautions at the beginning of this catalog section.

Material

Item Material Heat Treat FINISH
Body High-Strength Forged Alloy Steel - High-Visibility Powder-Coat
Bolt High-Stength Alloy Steel - Corrosion Resistant Plating
Retaining Ring Spring Steel - -

Material_CLM-71420-HE.jpg

Parts Specification

Load Rating (kg) G Thread Threadpitch A Diameter (mm) B (mm) C (mm) D (mm) E ±3.05 (mm) F (mm) H (mm) I Hex (mm) J Diameter (mm) K Diameter (mm) Installationtorque(nm)
400 M10mm 1.5mm 24mm 46mm 9mm 9mm 15mm 36mm 30mm 6mm 25.4mm 15mm 16

Warning:

This Product Can Expose You To Materials And/Or Chemicals Including Arsenic, Lead, And Other Materials And/Or Chemicals Which Are Known To The State Of California To Cause Cancer And/Or Reproductive Harm. For more information, visit www.P65Warnings.ca.gov