{"title":"Head Press-Fit Bushings (H)","description":null,"products":[{"product_id":"carr-lane-h-10-12-0310-5-32-od-x-3-4-length-head-press-fit-bushing","title":"Carr Lane H-10-12-.0310 | 5\/32\" OD x 3\/4\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/32-1\/16, #69-#53, .75-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751594369325,"sku":"70029448","price":47.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__37984.png?v=1721815058"},{"product_id":"carr-lane-h-10-12-0400-5-32-od-x-3-4-length-head-press-fit-bushing","title":"Carr Lane H-10-12-.0400 | 5\/32\" OD x 3\/4\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/32-1\/16, #69-#53, .75-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751594762541,"sku":"70029516","price":47.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__24542.png?v=1721815063"},{"product_id":"carr-lane-h-10-12-0430-5-32-od-x-3-4-length-head-press-fit-bushing","title":"Carr Lane H-10-12-.0430 | 5\/32\" OD x 3\/4\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/32-1\/16, #69-#53, .75-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751594926381,"sku":"70029569","price":47.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__29812.png?v=1721815067"},{"product_id":"carr-lane-h-10-12-0469-5-32-od-x-3-4-length-head-press-fit-bushing","title":"Carr Lane H-10-12-.0469 | 5\/32\" OD x 3\/4\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/32-1\/16, #69-#53, .75-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751595057453,"sku":"70028353","price":47.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__09737.png?v=1721815071"},{"product_id":"carr-lane-h-10-12-0520-5-32-od-x-3-4-length-head-press-fit-bushing","title":"Carr Lane H-10-12-.0520 | 5\/32\" OD x 3\/4\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/32-1\/16, #69-#53, .75-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751595319597,"sku":"70029588","price":37.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__58583.png?v=1721815077"},{"product_id":"carr-lane-h-10-12-0595-5-32-od-x-3-4-length-head-press-fit-bushing","title":"Carr Lane H-10-12-.0595 | 5\/32\" OD x 3\/4\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/32-1\/16, #69-#53, .75-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751595614509,"sku":"70029609","price":37.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__67446.png?v=1721815080"},{"product_id":"carr-lane-h-10-12-0625-5-32-od-x-3-4-length-head-press-fit-bushing","title":"Carr Lane H-10-12-.0625 | 5\/32\" OD x 3\/4\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/32-1\/16, #69-#53, .75-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751595843885,"sku":"70029271","price":37.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__05302.png?v=1721815085"},{"product_id":"carr-lane-h-10-4-0135-5-32-od-x-1-4-length-head-press-fit-bushing","title":"Carr Lane H-10-4-.0135 | 5\/32\" OD x 1\/4\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751596007725,"sku":"70029307","price":45.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__54136.png?v=1721815089"},{"product_id":"carr-lane-h-10-4-0145-5-32-od-x-1-4-length-head-press-fit-bushing","title":"Carr Lane H-10-4-.0145 | 5\/32\" OD x 1\/4\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751596204333,"sku":"70029340","price":45.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__66671.png?v=1721815094"},{"product_id":"carr-lane-h-10-4-0156-5-32-od-x-1-4-length-head-press-fit-bushing","title":"Carr Lane H-10-4-.0156 | 5\/32\" OD x 1\/4\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751596433709,"sku":"70029231","price":45.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__58093.png?v=1721815098"},{"product_id":"carr-lane-h-10-4-0180-5-32-od-x-1-4-length-head-press-fit-bushing","title":"Carr Lane H-10-4-.0180 | 5\/32\" OD x 1\/4\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751596564781,"sku":"70029355","price":45.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__83172.png?v=1721815102"},{"product_id":"carr-lane-h-10-4-0210-5-32-od-x-1-4-length-head-press-fit-bushing","title":"Carr Lane H-10-4-.0210 | 5\/32\" OD x 1\/4\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751596728621,"sku":"70029370","price":45.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__49553.png?v=1721815107"},{"product_id":"carr-lane-h-10-4-0225-5-32-od-x-1-4-length-head-press-fit-bushing","title":"Carr Lane H-10-4-.0225 | 5\/32\" OD x 1\/4\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751596957997,"sku":"70029378","price":45.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__65559.png?v=1721815111"},{"product_id":"carr-lane-h-10-4-0250-5-32-od-x-1-4-length-head-press-fit-bushing","title":"Carr Lane H-10-4-.0250 | 5\/32\" OD x 1\/4\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751597121837,"sku":"70029393","price":45.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__82131.png?v=1721815115"},{"product_id":"carr-lane-h-10-4-0310-5-32-od-x-1-4-length-head-press-fit-bushing","title":"Carr Lane H-10-4-.0310 | 5\/32\" OD x 1\/4\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751597351213,"sku":"70029449","price":40.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__93627.png?v=1721815120"},{"product_id":"carr-lane-h-10-4-0315-5-32-od-x-1-4-length-head-press-fit-bushing","title":"Carr Lane H-10-4-.0315 | 5\/32\" OD x 1\/4\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751597613357,"sku":"70027207","price":40.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__21300.png?v=1721815125"},{"product_id":"carr-lane-h-10-4-0360-5-32-od-x-1-4-length-head-press-fit-bushing","title":"Carr Lane H-10-4-.0360 | 5\/32\" OD x 1\/4\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751597875501,"sku":"70029482","price":40.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__87743.png?v=1721815129"},{"product_id":"carr-lane-h-10-4-0390-5-32-od-x-1-4-length-head-press-fit-bushing","title":"Carr Lane H-10-4-.0390 | 5\/32\" OD x 1\/4\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751598104877,"sku":"70029507","price":40.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__31662.png?v=1721815134"},{"product_id":"carr-lane-h-10-4-0400-5-32-od-x-1-4-length-head-press-fit-bushing","title":"Carr Lane H-10-4-.0400 | 5\/32\" OD x 1\/4\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751598235949,"sku":"70029517","price":40.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__63224.png?v=1721815139"},{"product_id":"carr-lane-h-10-4-0410-5-32-od-x-1-4-length-head-press-fit-bushing","title":"Carr Lane H-10-4-.0410 | 5\/32\" OD x 1\/4\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751598498093,"sku":"70029551","price":40.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__12200.png?v=1721815144"},{"product_id":"carr-lane-h-10-4-0420-5-32-od-x-1-4-length-head-press-fit-bushing","title":"Carr Lane H-10-4-.0420 | 5\/32\" OD x 1\/4\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751598727469,"sku":"70029560","price":40.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__63593.png?v=1721815148"},{"product_id":"carr-lane-h-10-4-0430-5-32-od-x-1-4-length-head-press-fit-bushing","title":"Carr Lane H-10-4-.0430 | 5\/32\" OD x 1\/4\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751598956845,"sku":"70029570","price":40.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__22599.png?v=1721815153"},{"product_id":"carr-lane-h-10-4-0433-5-32-od-x-1-4-length-head-press-fit-bushing","title":"Carr Lane H-10-4-.0433 | 5\/32\" OD x 1\/4\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751599382829,"sku":"70027161","price":40.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__75438.png?v=1721815157"},{"product_id":"carr-lane-h-10-4-0453-5-32-od-x-1-4-length-head-press-fit-bushing","title":"Carr Lane H-10-4-.0453 | 5\/32\" OD x 1\/4\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751599644973,"sku":"70027153","price":40.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__70807.png?v=1721815161"},{"product_id":"carr-lane-h-10-4-0465-5-32-od-x-1-4-length-head-press-fit-bushing","title":"Carr Lane H-10-4-.0465 | 5\/32\" OD x 1\/4\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751599776045,"sku":"70029579","price":40.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__65171.png?v=1721815166"},{"product_id":"carr-lane-h-10-4-0469-5-32-od-x-1-4-length-head-press-fit-bushing","title":"Carr Lane H-10-4-.0469 | 5\/32\" OD x 1\/4\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751599939885,"sku":"70028354","price":40.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__83962.png?v=1721815170"},{"product_id":"carr-lane-h-10-4-0472-5-32-od-x-1-4-length-head-press-fit-bushing","title":"Carr Lane H-10-4-.0472 | 5\/32\" OD x 1\/4\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751600202029,"sku":"70027144","price":40.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__33388.png?v=1721815174"},{"product_id":"carr-lane-h-10-4-0492-5-32-od-x-1-4-length-head-press-fit-bushing","title":"Carr Lane H-10-4-.0492 | 5\/32\" OD x 1\/4\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751600333101,"sku":"70027137","price":40.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__77711.png?v=1721815178"},{"product_id":"carr-lane-h-10-4-0512-5-32-od-x-1-4-length-head-press-fit-bushing","title":"Carr Lane H-10-4-.0512 | 5\/32\" OD x 1\/4\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751600496941,"sku":"70027128","price":40.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__83842.png?v=1721815183"},{"product_id":"carr-lane-h-10-4-0520-5-32-od-x-1-4-length-head-press-fit-bushing","title":"Carr Lane H-10-4-.0520 | 5\/32\" OD x 1\/4\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751600726317,"sku":"70029589","price":32.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__75131.png?v=1721815188"},{"product_id":"carr-lane-h-10-4-0531-5-32-od-x-1-4-length-head-press-fit-bushing","title":"Carr Lane H-10-4-.0531 | 5\/32\" OD x 1\/4\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751600922925,"sku":"70027119","price":32.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__26910.png?v=1721815192"},{"product_id":"carr-lane-h-10-4-0550-5-32-od-x-1-4-length-head-press-fit-bushing","title":"Carr Lane H-10-4-.0550 | 5\/32\" OD x 1\/4\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751601250605,"sku":"70029599","price":32.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__78056.png?v=1721815196"},{"product_id":"carr-lane-h-10-4-0551-5-32-od-x-1-4-length-head-press-fit-bushing","title":"Carr Lane H-10-4-.0551 | 5\/32\" OD x 1\/4\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751601381677,"sku":"70027111","price":32.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__79593.png?v=1721815200"},{"product_id":"carr-lane-h-10-4-0571-5-32-od-x-1-4-length-head-press-fit-bushing","title":"Carr Lane H-10-4-.0571 | 5\/32\" OD x 1\/4\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751601611053,"sku":"70027102","price":32.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__98869.png?v=1721815205"},{"product_id":"carr-lane-h-10-4-0591-5-32-od-x-1-4-length-head-press-fit-bushing","title":"Carr Lane H-10-4-.0591 | 5\/32\" OD x 1\/4\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751601807661,"sku":"70027093","price":32.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__62559.png?v=1721815209"},{"product_id":"carr-lane-h-10-4-0595-5-32-od-x-1-4-length-head-press-fit-bushing","title":"Carr Lane H-10-4-.0595 | 5\/32\" OD x 1\/4\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751601971501,"sku":"70029610","price":32.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__84187.png?v=1721815214"},{"product_id":"carr-lane-h-10-4-0610-5-32-od-x-1-4-length-head-press-fit-bushing","title":"Carr Lane H-10-4-.0610 | 5\/32\" OD x 1\/4\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751602331949,"sku":"70027084","price":32.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__04780.png?v=1721815219"},{"product_id":"carr-lane-h-10-4-0625-5-32-od-x-1-4-length-head-press-fit-bushing","title":"Carr Lane H-10-4-.0625 | 5\/32\" OD x 1\/4\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751602528557,"sku":"70029272","price":32.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__96264.png?v=1721815223"},{"product_id":"carr-lane-h-10-5-0135-5-32-od-x-5-16-length-head-press-fit-bushing","title":"Carr Lane H-10-5-.0135 | 5\/32\" OD x 5\/16\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/16\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751603151149,"sku":"70029305","price":46.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__66085.png?v=1721815228"},{"product_id":"carr-lane-h-10-5-0138-5-32-od-x-5-16-length-head-press-fit-bushing","title":"Carr Lane H-10-5-.0138 | 5\/32\" OD x 5\/16\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/16\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751603380525,"sku":"70027293","price":46.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__81274.png?v=1721815233"},{"product_id":"carr-lane-h-10-5-0145-5-32-od-x-5-16-length-head-press-fit-bushing","title":"Carr Lane H-10-5-.0145 | 5\/32\" OD x 5\/16\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/16\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751603708205,"sku":"70029338","price":46.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__33362.png?v=1721815237"},{"product_id":"carr-lane-h-10-5-0150-5-32-od-x-5-16-length-head-press-fit-bushing","title":"Carr Lane H-10-5-.0150 | 5\/32\" OD x 5\/16\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/16\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751603872045,"sku":"70027287","price":46.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__67368.png?v=1721815241"},{"product_id":"carr-lane-h-10-5-0156-5-32-od-x-5-16-length-head-press-fit-bushing","title":"Carr Lane H-10-5-.0156 | 5\/32\" OD x 5\/16\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/16\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751604101421,"sku":"70029229","price":46.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__24030.png?v=1721815246"},{"product_id":"carr-lane-h-10-5-0157-5-32-od-x-5-16-length-head-press-fit-bushing","title":"Carr Lane H-10-5-.0157 | 5\/32\" OD x 5\/16\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/16\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751604592941,"sku":"70027279","price":46.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__36047.png?v=1721815250"},{"product_id":"carr-lane-h-10-5-0160-5-32-od-x-5-16-length-head-press-fit-bushing","title":"Carr Lane H-10-5-.0160 | 5\/32\" OD x 5\/16\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/16\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751604756781,"sku":"70029346","price":46.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__22168.png?v=1721815255"},{"product_id":"carr-lane-h-10-5-0165-5-32-od-x-5-16-length-head-press-fit-bushing","title":"Carr Lane H-10-5-.0165 | 5\/32\" OD x 5\/16\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/16\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751604986157,"sku":"70027272","price":46.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__59046.png?v=1721815260"},{"product_id":"carr-lane-h-10-5-0177-5-32-od-x-5-16-length-head-press-fit-bushing","title":"Carr Lane H-10-5-.0177 | 5\/32\" OD x 5\/16\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/16\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751605215533,"sku":"70027265","price":46.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__50673.png?v=1721815264"},{"product_id":"carr-lane-h-10-5-0180-5-32-od-x-5-16-length-head-press-fit-bushing","title":"Carr Lane H-10-5-.0180 | 5\/32\" OD x 5\/16\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/16\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751605510445,"sku":"70029353","price":46.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__81412.png?v=1721815268"},{"product_id":"carr-lane-h-10-5-0189-5-32-od-x-5-16-length-head-press-fit-bushing","title":"Carr Lane H-10-5-.0189 | 5\/32\" OD x 5\/16\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/16\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751605707053,"sku":"70027258","price":46.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__65204.png?v=1721815273"},{"product_id":"carr-lane-h-10-5-0197-5-32-od-x-5-16-length-head-press-fit-bushing","title":"Carr Lane H-10-5-.0197 | 5\/32\" OD x 5\/16\" Length Head Press-Fit Bushing","description":"\u003ch3\u003eHead Press-Fit Bushings (H)\u003c\/h3\u003e\u003cp\u003eH Bushings are similar to P bushings, but with a head to resist heavy axial loads. Type H bushings are permanently pressed into the jig plate. H bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. The head of type H bushings can be left exposed, or recessed by counterboring the installation hole. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eH bushings are permanently pressed into the jig plate. The head can be left exposed, or recessed by counterboring the installation hole.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ApplicationInformation.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\" +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"  +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up+0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"     +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"   +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"   +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"     +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"    +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eheat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-Material_jpg.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eG (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/16\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49751606100269,"sku":"70027251","price":46.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/H-10-ProductInformation__59746.png?v=1721815278"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/collections\/Head_Press-Fit_Bushings_H.png?v=1722432035","url":"https:\/\/allindustrial.mx\/es\/collections\/head-press-fit-bushings-h.oembed?page=37","provider":"All Industrial Tool Supply Mexico","version":"1.0","type":"link"}