{"title":"Fixed Renewable Bushings - Metric (SFM)","description":null,"products":[{"product_id":"carr-lane-sfm-10-25-4-50-slip-fixed-renewable-bushing","title":"Carr Lane SFM-10-25-4.50 | Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings-Metric\u003c\/h3\u003e\u003cp\u003eMetric version of the popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lockscrew. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eStandard ID Tolerance (G6):\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eFrom .35 to 3mm +0.002\/+0.008mm\u003c\/p\u003e\u003cp\u003eOver 3 to 6mm +0.004\/+0.012mm\u003c\/p\u003e\u003cp\u003eOver 6 to 10mm +0.005\/+0.014mm\u003c\/p\u003e\u003cp\u003eOver 10 to 18mm +0.006\/+0.017mm\u003c\/p\u003e\u003cp\u003eOver 18 to 30mm +0.007\/+0.020mm\u003c\/p\u003e\u003cp\u003eOver 30 to 50mm +0.009\/+0.025mm\u003c\/p\u003e\u003cp\u003eOver 50 to 80mm +0.010\/+0.029mm\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (F6) (Special):\u003c\/b\u003e\u003cp\u003eFrom 1 to 3mm +0.006\/+0.012mm\u003c\/p\u003e\u003cp\u003eOver 3 to 6mm +0.010\/+0.018mm\u003c\/p\u003e\u003cp\u003eOver 6 to 10mm +0.013\/+0.022mm\u003c\/p\u003e\u003cp\u003eOver 10 to 18mm +0.016\/+0.027mm\u003c\/p\u003e\u003cp\u003eOver 18 to 30mm +0.020\/+0.033mm\u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eStandard OD Tolerance (h5):\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e8 to 10mm 0\/-0.006\u003c\/p\u003e\u003cp\u003e12 to 18mm 0\/-0.008\u003c\/p\u003e\u003cp\u003e22 to 30mm 0\/-0.009\u003c\/p\u003e\u003cp\u003e35 to 48mm 0\/-0.011\u003c\/p\u003e\u003cp\u003e55 to 78mm 0\/-0.013\u003c\/p\u003e\u003cp\u003e85mm 0\/-0.015\u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e1144 Stressproof steel, heat treated to achieve Rc 62-64 ID hardness. DFARS and RoHS compliant.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-4.50-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eID (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Dia (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e4.50mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e10mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e25mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e18mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e6mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e6mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e65 Degree\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e13mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49781041299757,"sku":"70008872","price":22.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-4.50-ProductInformation__11861.jpg?v=1722431365"},{"product_id":"carr-lane-sfm-10-25-5-20-5-20mm-inner-diameter-x-10-00mm-outer-diameter-x-25-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-10-25-5.20 | 5.20mm Inner Diameter x 10.00mm Outer Diameter x 25.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5_20_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5_20_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5_20_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5_20_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-10-25-5.20\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e5.20\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e10\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e25\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e18\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e6\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e3\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e6\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e65 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e13\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-1 or LSM-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721310634285,"sku":"70008880","price":22.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5.20_Product_Information_1__87664.png?v=1767048409"},{"product_id":"carr-lane-sfm-10-25-5-60-5-60mm-inner-diameter-x-10-00mm-outer-diameter-x-25-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-10-25-5.60 | 5.60mm Inner Diameter x 10.00mm Outer Diameter x 25.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5_60_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5_60_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5_60_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5_60_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-10-25-5.60\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e5.60\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e10\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e25\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e18\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e6\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e3\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e6\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e65 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e13\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-1 or LSM-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721310699821,"sku":"70008885","price":22.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5.60_Product_Information_1__94973.png?v=1767048414"},{"product_id":"carr-lane-sfm-10-25-5-25-5-25mm-inner-diameter-x-10-00mm-outer-diameter-x-25-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-10-25-5.25 | 5.25mm Inner Diameter x 10.00mm Outer Diameter x 25.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5_25_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5_25_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5_25_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5_25_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-10-25-5.25\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e5.25\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e10\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e25\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e18\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e6\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e3\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e6\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e65 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e13\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-1 or LSM-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721310765357,"sku":"70008881","price":22.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5.25_Product_Information_1__19676.png?v=1767048419"},{"product_id":"carr-lane-sfm-10-25-5-10-5-10mm-inner-diameter-x-10-00mm-outer-diameter-x-25-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-10-25-5.10 | 5.10mm Inner Diameter x 10.00mm Outer Diameter x 25.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5_10_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5_10_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5_10_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5_10_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-10-25-5.10\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e5.10\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e10\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e25\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e18\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e6\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e3\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e6\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e65 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e13\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-1 or LSM-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721310798125,"sku":"70008879","price":22.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5.10_Product_Information_1__19928.png?v=1767048424"},{"product_id":"carr-lane-sfm-10-25-5-50-5-50mm-inner-diameter-x-10-00mm-outer-diameter-x-25-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-10-25-5.50 | 5.50mm Inner Diameter x 10.00mm Outer Diameter x 25.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5_50_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5_50_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5_50_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5_50_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-10-25-5.50\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e5.50\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e10\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e25\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e18\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e6\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e3\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e6\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e65 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e13\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-1 or LSM-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721310830893,"sku":"70008884","price":22.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5.50_Product_Information_1__48124.png?v=1767048428"},{"product_id":"carr-lane-sfm-10-25-5-80-5-80mm-inner-diameter-x-10-00mm-outer-diameter-x-25-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-10-25-5.80 | 5.80mm Inner Diameter x 10.00mm Outer Diameter x 25.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5_80_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5_80_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5_80_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5_80_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-10-25-5.80\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e5.80\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e10\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e25\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e18\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e6\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e3\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e6\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e65 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e13\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-1 or LSM-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721310896429,"sku":"70008888","price":22.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5.80_Product_Information_1__74456.png?v=1767048433"},{"product_id":"carr-lane-sfm-10-25-5-40-5-40mm-inner-diameter-x-10-00mm-outer-diameter-x-25-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-10-25-5.40 | 5.40mm Inner Diameter x 10.00mm Outer Diameter x 25.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5_40_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5_40_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5_40_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5_40_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-10-25-5.40\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e5.40\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e10\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e25\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e18\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e6\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e3\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e6\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e65 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e13\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-1 or LSM-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721311879469,"sku":"70008883","price":22.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5.40_Product_Information_1__11515.png?v=1767048437"},{"product_id":"carr-lane-sfm-10-25-5-70-5-70mm-inner-diameter-x-10-00mm-outer-diameter-x-25-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-10-25-5.70 | 5.70mm Inner Diameter x 10.00mm Outer Diameter x 25.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5_70_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5_70_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5_70_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5_70_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-10-25-5.70\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e5.70\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e10\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e25\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e18\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e6\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e3\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e6\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e65 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e13\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-1 or LSM-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721311912237,"sku":"70008886","price":22.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5.70_Product_Information_1__14123.png?v=1767048442"},{"product_id":"carr-lane-sfm-10-25-5-75-5-75mm-inner-diameter-x-10-00mm-outer-diameter-x-25-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-10-25-5.75 | 5.75mm Inner Diameter x 10.00mm Outer Diameter x 25.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5_75_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5_75_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5_75_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5_75_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-10-25-5.75\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e5.75\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e10\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e25\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e18\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e6\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e3\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e6\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e65 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e13\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-1 or LSM-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721312010541,"sku":"70008887","price":22.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5.75_Product_Information_1__28879.png?v=1767048447"},{"product_id":"carr-lane-sfm-10-25-5-30-5-30mm-inner-diameter-x-10-00mm-outer-diameter-x-25-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-10-25-5.30 | 5.30mm Inner Diameter x 10.00mm Outer Diameter x 25.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5_30_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5_30_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5_30_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5_30_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-10-25-5.30\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e5.30\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e10\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e25\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e18\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e6\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e3\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e6\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e65 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e13\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-1 or LSM-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721312108845,"sku":"70008882","price":22.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5.30_Product_Information_1__22898.png?v=1767048452"},{"product_id":"carr-lane-sfm-12-12-6-70-6-70mm-inner-diameter-x-12-00mm-outer-diameter-x-12-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-12-12-6.70 | 6.70mm Inner Diameter x 12.00mm Outer Diameter x 12.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6_70_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6_70_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6_70_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6_70_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-12-12-6.70\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e6.70\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e22\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e8\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e4\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.5\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e60 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e16\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-3 or LSM-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721312207149,"sku":"70008900","price":18.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6.70_Product_Information_1__10082.png?v=1767048457"},{"product_id":"carr-lane-sfm-12-12-6-30-6-30mm-inner-diameter-x-12-00mm-outer-diameter-x-12-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-12-12-6.30 | 6.30mm Inner Diameter x 12.00mm Outer Diameter x 12.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6_30_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6_30_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6_30_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6_30_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-12-12-6.30\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e6.30\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e22\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e8\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e4\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.5\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e60 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e16\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-3 or LSM-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721312272685,"sku":"70008896","price":18.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6.30_Product_Information_1__76693.png?v=1767048461"},{"product_id":"carr-lane-sfm-12-12-6-10-6-10mm-inner-diameter-x-12-00mm-outer-diameter-x-12-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-12-12-6.10 | 6.10mm Inner Diameter x 12.00mm Outer Diameter x 12.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6_10_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6_10_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6_10_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6_10_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-12-12-6.10\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e6.10\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e22\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e8\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e4\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.5\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e60 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e16\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-3 or LSM-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721312338221,"sku":"70008893","price":18.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6.10_Product_Information_1__73182.png?v=1767048466"},{"product_id":"carr-lane-sfm-10-25-5-90-5-90mm-inner-diameter-x-10-00mm-outer-diameter-x-25-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-10-25-5.90 | 5.90mm Inner Diameter x 10.00mm Outer Diameter x 25.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5_90_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5_90_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5_90_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5_90_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-10-25-5.90\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e5.90\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e10\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e25\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e18\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e6\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e3\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e6\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e65 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e13\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-1 or LSM-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721312469293,"sku":"70008889","price":22.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-5.90_Product_Information_1__16701.png?v=1767048471"},{"product_id":"carr-lane-sfm-12-12-6-40-6-40mm-inner-diameter-x-12-00mm-outer-diameter-x-12-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-12-12-6.40 | 6.40mm Inner Diameter x 12.00mm Outer Diameter x 12.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6_40_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6_40_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6_40_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6_40_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-12-12-6.40\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e6.40\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e22\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e8\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e4\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.5\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e60 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e16\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-3 or LSM-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721312502061,"sku":"70008897","price":18.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6.40_Product_Information_1__45252.png?v=1767048475"},{"product_id":"carr-lane-sfm-12-12-6-20-6-20mm-inner-diameter-x-12-00mm-outer-diameter-x-12-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-12-12-6.20 | 6.20mm Inner Diameter x 12.00mm Outer Diameter x 12.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6_20_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6_20_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6_20_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6_20_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-12-12-6.20\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e6.20\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e22\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e8\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e4\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.5\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e60 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e16\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-3 or LSM-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721312534829,"sku":"70008894","price":18.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6.20_Product_Information_1__64079.png?v=1767048480"},{"product_id":"carr-lane-sfm-10-25-6-00-6-00mm-inner-diameter-x-10-00mm-outer-diameter-x-25-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-10-25-6.00 | 6.00mm Inner Diameter x 10.00mm Outer Diameter x 25.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-6_00_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-6_00_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-6_00_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-6_00_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-10-25-6.00\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e6.00\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e10\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e25\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e18\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e6\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e3\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e6\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e65 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e13\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-1 or LSM-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721312567597,"sku":"70008890","price":22.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-10-25-6.00_Product_Information_1__78093.png?v=1767048484"},{"product_id":"carr-lane-sfm-12-12-6-25-6-25mm-inner-diameter-x-12-00mm-outer-diameter-x-12-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-12-12-6.25 | 6.25mm Inner Diameter x 12.00mm Outer Diameter x 12.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6_25_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6_25_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6_25_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6_25_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-12-12-6.25\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e6.25\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e22\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e8\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e4\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.5\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e60 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e16\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-3 or LSM-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721312600365,"sku":"70008895","price":18.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6.25_Product_Information_1__49951.png?v=1767048489"},{"product_id":"carr-lane-sfm-12-12-6-50-6-50mm-inner-diameter-x-12-00mm-outer-diameter-x-12-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-12-12-6.50 | 6.50mm Inner Diameter x 12.00mm Outer Diameter x 12.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6_50_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6_50_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6_50_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6_50_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-12-12-6.50\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e6.50\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e22\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e8\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e4\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.5\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e60 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e16\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-3 or LSM-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721312633133,"sku":"70008898","price":18.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6.50_Product_Information_1__48330.png?v=1767048494"},{"product_id":"carr-lane-sfm-12-12-6-60-6-60mm-inner-diameter-x-12-00mm-outer-diameter-x-12-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-12-12-6.60 | 6.60mm Inner Diameter x 12.00mm Outer Diameter x 12.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6_60_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6_60_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6_60_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6_60_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-12-12-6.60\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e6.60\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e22\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e8\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e4\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.5\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e60 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e16\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-3 or LSM-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721312698669,"sku":"70008899","price":18.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6.60_Product_Information_1__19145.png?v=1767048498"},{"product_id":"carr-lane-sfm-12-12-6-75-6-75mm-inner-diameter-x-12-00mm-outer-diameter-x-12-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-12-12-6.75 | 6.75mm Inner Diameter x 12.00mm Outer Diameter x 12.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6_75_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6_75_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6_75_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6_75_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-12-12-6.75\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e6.75\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e22\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e8\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e4\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.5\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e60 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e16\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-3 or LSM-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721312960813,"sku":"70008901","price":18.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6.75_Product_Information_1__80430.png?v=1767048503"},{"product_id":"carr-lane-sfm-12-12-7-30-7-30mm-inner-diameter-x-12-00mm-outer-diameter-x-12-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-12-12-7.30 | 7.30mm Inner Diameter x 12.00mm Outer Diameter x 12.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7_30_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7_30_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7_30_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7_30_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-12-12-7.30\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.30\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e22\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e8\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e4\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.5\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e60 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e16\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-3 or LSM-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721312993581,"sku":"70008908","price":18.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7.30_Product_Information_1__37240.jpg?v=1767048508"},{"product_id":"carr-lane-sfm-12-12-7-25-7-25mm-inner-diameter-x-12-00mm-outer-diameter-x-12-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-12-12-7.25 | 7.25mm Inner Diameter x 12.00mm Outer Diameter x 12.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7_25_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7_25_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7_25_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7_25_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-12-12-7.25\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.25\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e22\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e8\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e4\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.5\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e60 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e16\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-3 or LSM-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721313026349,"sku":"70008907","price":18.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7.25_Product_Information_1__60476.jpg?v=1767048513"},{"product_id":"carr-lane-sfm-12-12-7-50-7-50mm-inner-diameter-x-12-00mm-outer-diameter-x-12-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-12-12-7.50 | 7.50mm Inner Diameter x 12.00mm Outer Diameter x 12.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7_50_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7_50_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7_50_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7_50_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-12-12-7.50\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.50\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e22\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e8\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e4\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.5\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e60 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e16\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-3 or LSM-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721313124653,"sku":"70008910","price":18.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7.50_Product_Information_1__11445.jpg?v=1767048518"},{"product_id":"carr-lane-sfm-12-12-7-40-7-40mm-inner-diameter-x-12-00mm-outer-diameter-x-12-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-12-12-7.40 | 7.40mm Inner Diameter x 12.00mm Outer Diameter x 12.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7_40_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7_40_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7_40_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7_40_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-12-12-7.40\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.40\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e22\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e8\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e4\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.5\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e60 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e16\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-3 or LSM-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721313157421,"sku":"70008909","price":18.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7.40_Product_Information_1__54963.jpg?v=1767048522"},{"product_id":"carr-lane-sfm-12-12-7-20-7-20mm-inner-diameter-x-12-00mm-outer-diameter-x-12-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-12-12-7.20 | 7.20mm Inner Diameter x 12.00mm Outer Diameter x 12.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7_20_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7_20_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7_20_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7_20_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-12-12-7.20\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.20\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e22\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e8\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e4\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.5\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e60 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e16\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-3 or LSM-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721313190189,"sku":"70008906","price":18.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7.20_Product_Information_1__54967.jpg?v=1767048527"},{"product_id":"carr-lane-sfm-12-12-7-10-7-10mm-inner-diameter-x-12-00mm-outer-diameter-x-12-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-12-12-7.10 | 7.10mm Inner Diameter x 12.00mm Outer Diameter x 12.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7_10_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7_10_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7_10_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7_10_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-12-12-7.10\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.10\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e22\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e8\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e4\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.5\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e60 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e16\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-3 or LSM-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721313255725,"sku":"70008905","price":18.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7.10_Product_Information_1__47181.jpg?v=1767048532"},{"product_id":"carr-lane-sfm-12-12-7-00-7-00mm-inner-diameter-x-12-00mm-outer-diameter-x-12-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-12-12-7.00 | 7.00mm Inner Diameter x 12.00mm Outer Diameter x 12.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7_00_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7_00_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7_00_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7_00_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-12-12-7.00\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.00\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e22\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e8\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e4\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.5\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e60 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e16\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-3 or LSM-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721313288493,"sku":"70008904","price":18.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7.00_Product_Information_1__22347.jpg?v=1767048537"},{"product_id":"carr-lane-sfm-12-12-6-80-6-80mm-inner-diameter-x-12-00mm-outer-diameter-x-12-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-12-12-6.80 | 6.80mm Inner Diameter x 12.00mm Outer Diameter x 12.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6_80_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6_80_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6_80_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6_80_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-12-12-6.80\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e6.80\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e22\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e8\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e4\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.5\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e60 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e16\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-3 or LSM-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721313321261,"sku":"70008902","price":18.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6.80_Product_Information_1__16034.jpg?v=1767048542"},{"product_id":"carr-lane-sfm-12-12-6-90-6-90mm-inner-diameter-x-12-00mm-outer-diameter-x-12-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-12-12-6.90 | 6.90mm Inner Diameter x 12.00mm Outer Diameter x 12.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6_90_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6_90_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6_90_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6_90_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-12-12-6.90\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e6.90\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e22\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e8\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e4\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.5\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e60 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e16\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-3 or LSM-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721313354029,"sku":"70008903","price":18.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-6.90_Product_Information_1__93664.jpg?v=1767048546"},{"product_id":"carr-lane-sfm-12-12-7-70-7-70mm-inner-diameter-x-12-00mm-outer-diameter-x-12-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-12-12-7.70 | 7.70mm Inner Diameter x 12.00mm Outer Diameter x 12.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7_70_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7_70_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7_70_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7_70_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-12-12-7.70\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.70\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e22\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e8\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e4\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.5\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e60 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e16\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-3 or LSM-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721313386797,"sku":"70008912","price":18.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7.70_Product_Information_1__01471.jpg?v=1767048550"},{"product_id":"carr-lane-sfm-12-12-7-60-7-60mm-inner-diameter-x-12-00mm-outer-diameter-x-12-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-12-12-7.60 | 7.60mm Inner Diameter x 12.00mm Outer Diameter x 12.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7_60_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7_60_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7_60_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7_60_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-12-12-7.60\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.60\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e22\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e8\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e4\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.5\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e60 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e16\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-3 or LSM-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721313452333,"sku":"70008911","price":18.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7.60_Product_Information_1__66065.jpg?v=1767048555"},{"product_id":"carr-lane-sfm-12-20-6-25-6-25mm-inner-diameter-x-12-00mm-outer-diameter-x-20-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-12-20-6.25 | 6.25mm Inner Diameter x 12.00mm Outer Diameter x 20.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6_25_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6_25_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6_25_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6_25_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-12-20-6.25\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e6.25\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e20\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e22\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e8\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e4\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.5\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e60 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e16\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-3 or LSM-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721313485101,"sku":"70008919","price":19.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6.25_Product_Information_1__56572.jpg?v=1767048559"},{"product_id":"carr-lane-sfm-12-20-6-10-6-10mm-inner-diameter-x-12-00mm-outer-diameter-x-20-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-12-20-6.10 | 6.10mm Inner Diameter x 12.00mm Outer Diameter x 20.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6_10_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6_10_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6_10_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6_10_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-12-20-6.10\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e6.10\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e20\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e22\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e8\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e4\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.5\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e60 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e16\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-3 or LSM-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721313616173,"sku":"70008917","price":19.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6.10_Product_Information_1__18062.jpg?v=1767048564"},{"product_id":"carr-lane-sfm-12-12-7-80-7-80mm-inner-diameter-x-12-00mm-outer-diameter-x-12-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-12-12-7.80 | 7.80mm Inner Diameter x 12.00mm Outer Diameter x 12.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7_80_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7_80_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7_80_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7_80_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-12-12-7.80\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.80\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e22\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e8\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e4\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.5\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e60 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e16\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-3 or LSM-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721313648941,"sku":"70008914","price":18.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7.80_Product_Information_1__03257.jpg?v=1767048569"},{"product_id":"carr-lane-sfm-12-12-8-00-8-00mm-inner-diameter-x-12-00mm-outer-diameter-x-12-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-12-12-8.00 | 8.00mm Inner Diameter x 12.00mm Outer Diameter x 12.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-8_00_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-8_00_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-8_00_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-8_00_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-12-12-8.00\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e8.00\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e22\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e8\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e4\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.5\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e60 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e16\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-3 or LSM-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721313747245,"sku":"70008916","price":18.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-8.00_Product_Information_1__83496.jpg?v=1767048574"},{"product_id":"carr-lane-sfm-12-12-7-90-7-90mm-inner-diameter-x-12-00mm-outer-diameter-x-12-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-12-12-7.90 | 7.90mm Inner Diameter x 12.00mm Outer Diameter x 12.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7_90_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7_90_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7_90_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7_90_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-12-12-7.90\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.90\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e22\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e8\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e4\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.5\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e60 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e16\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-3 or LSM-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721313780013,"sku":"70008915","price":18.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7.90_Product_Information_1__95647.jpg?v=1767048578"},{"product_id":"carr-lane-sfm-12-20-6-20-6-20mm-inner-diameter-x-12-00mm-outer-diameter-x-20-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-12-20-6.20 | 6.20mm Inner Diameter x 12.00mm Outer Diameter x 20.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6_20_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6_20_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6_20_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6_20_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-12-20-6.20\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e6.20\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e20\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e22\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e8\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e4\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.5\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e60 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e16\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-3 or LSM-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721313845549,"sku":"70008918","price":19.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6.20_Product_Information_1__18547.jpg?v=1767048582"},{"product_id":"carr-lane-sfm-12-12-7-75-7-75mm-inner-diameter-x-12-00mm-outer-diameter-x-12-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-12-12-7.75 | 7.75mm Inner Diameter x 12.00mm Outer Diameter x 12.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7_75_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7_75_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7_75_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7_75_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-12-12-7.75\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.75\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e22\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e8\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e4\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.5\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e60 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e16\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-3 or LSM-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721313943853,"sku":"70008913","price":18.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-12-7.75_Product_Information_1__95359.jpg?v=1767048587"},{"product_id":"carr-lane-sfm-12-20-6-30-6-30mm-inner-diameter-x-12-00mm-outer-diameter-x-20-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-12-20-6.30 | 6.30mm Inner Diameter x 12.00mm Outer Diameter x 20.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6_30_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6_30_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6_30_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6_30_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-12-20-6.30\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e6.30\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e20\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e22\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e8\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e4\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.5\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e60 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e16\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-3 or LSM-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721314107693,"sku":"70008920","price":19.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6.30_Product_Information_1__34820.jpg?v=1767048592"},{"product_id":"carr-lane-sfm-12-20-6-40-6-40mm-inner-diameter-x-12-00mm-outer-diameter-x-20-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-12-20-6.40 | 6.40mm Inner Diameter x 12.00mm Outer Diameter x 20.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6_40_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6_40_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6_40_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6_40_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-12-20-6.40\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e6.40\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e20\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e22\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e8\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e4\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.5\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e60 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e16\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-3 or LSM-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721314140461,"sku":"70008921","price":19.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6.40_Product_Information_1__76569.jpg?v=1767048597"},{"product_id":"carr-lane-sfm-12-20-6-50-6-50mm-inner-diameter-x-12-00mm-outer-diameter-x-20-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-12-20-6.50 | 6.50mm Inner Diameter x 12.00mm Outer Diameter x 20.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6_50_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6_50_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6_50_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6_50_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-12-20-6.50\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e6.50\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e20\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e22\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e8\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e4\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.5\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e60 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e16\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-3 or LSM-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721314173229,"sku":"70008922","price":19.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6.50_Product_Information_1__78818.jpg?v=1767048602"},{"product_id":"carr-lane-sfm-12-20-6-70-6-70mm-inner-diameter-x-12-00mm-outer-diameter-x-20-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-12-20-6.70 | 6.70mm Inner Diameter x 12.00mm Outer Diameter x 20.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6_70_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6_70_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6_70_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6_70_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-12-20-6.70\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e6.70\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e20\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e22\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e8\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e4\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.5\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e60 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e16\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-3 or LSM-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721314205997,"sku":"70008924","price":19.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6.70_Product_Information_1__02397.jpg?v=1767048606"},{"product_id":"carr-lane-sfm-12-20-6-60-6-60mm-inner-diameter-x-12-00mm-outer-diameter-x-20-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-12-20-6.60 | 6.60mm Inner Diameter x 12.00mm Outer Diameter x 20.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6_60_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6_60_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6_60_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6_60_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-12-20-6.60\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e6.60\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e20\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e22\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e8\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e4\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.5\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e60 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e16\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-3 or LSM-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721314238765,"sku":"70008923","price":19.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6.60_Product_Information_1__70527.jpg?v=1767048610"},{"product_id":"carr-lane-sfm-12-20-6-75-6-75mm-inner-diameter-x-12-00mm-outer-diameter-x-20-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-12-20-6.75 | 6.75mm Inner Diameter x 12.00mm Outer Diameter x 20.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6_75_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6_75_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6_75_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6_75_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-12-20-6.75\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e6.75\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e20\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e22\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e8\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e4\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.5\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e60 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e16\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-3 or LSM-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721314304301,"sku":"70008925","price":19.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6.75_Product_Information_1__60173.jpg?v=1767048615"},{"product_id":"carr-lane-sfm-12-20-7-00-7-00mm-inner-diameter-x-12-00mm-outer-diameter-x-20-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-12-20-7.00 | 7.00mm Inner Diameter x 12.00mm Outer Diameter x 20.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-7_00_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-7_00_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-7_00_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-7_00_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-12-20-7.00\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.00\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e20\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e22\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e8\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e4\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.5\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e60 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e16\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-3 or LSM-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721314435373,"sku":"70008928","price":19.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-7.00_Product_Information_1__48803.jpg?v=1767048620"},{"product_id":"carr-lane-sfm-12-20-7-20-7-20mm-inner-diameter-x-12-00mm-outer-diameter-x-20-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-12-20-7.20 | 7.20mm Inner Diameter x 12.00mm Outer Diameter x 20.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-7_20_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-7_20_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-7_20_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-7_20_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-12-20-7.20\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.20\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e20\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e22\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e8\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e4\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.5\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e60 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e16\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-3 or LSM-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721314500909,"sku":"70008930","price":19.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-7.20_Product_Information_1__62653.jpg?v=1767048624"},{"product_id":"carr-lane-sfm-12-20-6-90-6-90mm-inner-diameter-x-12-00mm-outer-diameter-x-20-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-12-20-6.90 | 6.90mm Inner Diameter x 12.00mm Outer Diameter x 20.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6_90_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6_90_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6_90_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6_90_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-12-20-6.90\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e6.90\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e20\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e22\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e8\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e4\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.5\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e60 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e16\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-3 or LSM-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721314566445,"sku":"70008927","price":19.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6.90_Product_Information_1__06970.jpg?v=1767048629"},{"product_id":"carr-lane-sfm-12-20-6-80-6-80mm-inner-diameter-x-12-00mm-outer-diameter-x-20-00mm-length-fixed-renewable-bushing-sfm","title":"Carr Lane SFM-12-20-6.80 | 6.80mm Inner Diameter x 12.00mm Outer Diameter x 20.00mm Length Fixed Renewable Bushing (SFM)","description":"\u003ch3\u003eProduct Information\u003c\/h3\u003e\u003cp\u003eMetric version of our popular SF bushing. These replaceable SFM bushings are generally used with a liner bushing and lock screw. Use when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SFM bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side has a lock screw recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. Complete part numbers for all standard SFM bushings (all standard ID, OD, and length combinations) are listed in the tables below. The Part Configurator link at the top of this page can be used for any SFM bushing, either standard or special. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6_80_Product_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lock screw. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6_80_Application_Information_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cp\u003eStandard ID Tolerance (G6): From .35 to 3mm +.002\/+.008mm Over 3 to 6mm +.004\/+.012mm Over 6 to 10mm +.005\/+.014mm Over 10 to 18mm +.006\/+.017mm Over 18 to 30mm +.007\/+.020mm Over 30 to 50mm +.009\/+.025mm Over 50 to 80mm +.010\/+.029mmReamer ID Tolerance (F6) (Special): From 1 to 3mm +.006\/+.012mm Over 3 to 6mm +.010\/+.018mm Over 6 to 10mm +.013\/+.022mm Over 10 to 18mm +.016\/+.027mm Over 18 to 30mm +.020\/+.033mmReamer bushings have a different ID-tolerance range than drill bushings. To special-order bushings with the reamer ID tolerance shown here, add \"-REAMER\" to the part number: SFM-8-16-4.50-REAMER (Special) \u003c\/p\u003e\u003ch3\u003eOD tolerance\u003c\/h3\u003e\u003cp\u003eStandard OD Tolerance (h5): 8 to 10mm 0\/-.006 12 to 18mm 0\/-.008 22 to 30mm 0\/-.009 35 to 48mm 0\/-.011 55 to 78mm 0\/-.013 85mm0\/-.015 \u003c\/p\u003e\u003ch3\u003eCounterbore on Small Drill Sizes\u003c\/h3\u003e\u003cp\u003eMetric bushings with small drill sizes through .80mm are counterbored 1.00mm diameter with 3mm drill-bearing length, according to ANSI standards, to eliminate binding and heat buildup. \u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6_80_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6_80_Material_1_jpg.png\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003cdiv class=\"col-md-6\"\u003e\u003ctable class=\"table table-condensed table-striped table-bordered table-primary\"\u003e\n\u003cthead\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eID (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eOD (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLENGTH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eF DIA (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eG (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eH (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eJ (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eR (mm)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e\u003cstrong\u003eLOCKSCREW\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eSFM-12-20-6.80\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e6.80\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e12\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e20\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e22\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e8\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e4\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e7.5\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e60 Degree\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003e16\u003c\/td\u003e\n\u003ctd style=\"text-align: left; padding: 10px;\"\u003eLSM-3 or LSM-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":51721314599213,"sku":"70008926","price":19.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SFM-12-20-6.80_Product_Information_1__08474.jpg?v=1767048633"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/collections\/Fixed_Renewable_Bushings_-_Metric_SFM.jpg?v=1722432668","url":"https:\/\/allindustrial.mx\/es\/collections\/fixed-renewable-bushings-metric-sfm.oembed?page=2","provider":"All Industrial Tool Supply Mexico","version":"1.0","type":"link"}