{"title":"Renewable Bushings","description":"","products":[{"product_id":"carr-lane-sf-112-12-9688-1-3-4-od-x-3-4-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-12-.9688 | 1-3\/4\" OD x 3\/4\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774132199725,"sku":"70011656","price":42.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__36152.jpg?v=1722294842"},{"product_id":"carr-lane-sf-112-12-9843-1-3-4-od-x-3-4-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-12-.9843 | 1-3\/4\" OD x 3\/4\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774132232493,"sku":"70012029","price":42.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__02142.jpg?v=1722294847"},{"product_id":"carr-lane-sf-112-12-9844-1-3-4-od-x-3-4-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-12-.9844 | 1-3\/4\" OD x 3\/4\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774132265261,"sku":"70010715","price":42.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__65152.jpg?v=1722294851"},{"product_id":"carr-lane-sf-112-12-1-0000-1-3-4-od-x-3-4-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-12-1.0000 | 1-3\/4\" OD x 3\/4\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774132298029,"sku":"70015076","price":42.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__00853.jpg?v=1722294855"},{"product_id":"carr-lane-sf-112-12-1-0156-1-3-4-od-x-3-4-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-12-1.0156 | 1-3\/4\" OD x 3\/4\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774132330797,"sku":"70013295","price":42.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__38348.jpg?v=1722294860"},{"product_id":"carr-lane-sf-112-12-1-0312-1-3-4-od-x-3-4-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-12-1.0312 | 1-3\/4\" OD x 3\/4\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774135017773,"sku":"70013334","price":42.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__33314.jpg?v=1722294874"},{"product_id":"carr-lane-sf-112-12-1-0469-1-3-4-od-x-3-4-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-12-1.0469 | 1-3\/4\" OD x 3\/4\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774135050541,"sku":"70012914","price":42.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__95123.jpg?v=1722294878"},{"product_id":"carr-lane-sf-112-12-1-0625-1-3-4-od-x-3-4-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-12-1.0625 | 1-3\/4\" OD x 3\/4\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774135116077,"sku":"70013384","price":42.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__87898.jpg?v=1722294882"},{"product_id":"carr-lane-sf-112-12-1-0630-1-3-4-od-x-3-4-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-12-1.0630 | 1-3\/4\" OD x 3\/4\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774135148845,"sku":"70011964","price":42.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__88046.jpg?v=1722294886"},{"product_id":"carr-lane-sf-112-12-1-0781-1-3-4-od-x-3-4-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-12-1.0781 | 1-3\/4\" OD x 3\/4\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774135181613,"sku":"70012689","price":42.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__66146.jpg?v=1722294891"},{"product_id":"carr-lane-sf-112-12-1-0938-1-3-4-od-x-3-4-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-12-1.0938 | 1-3\/4\" OD x 3\/4\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774135214381,"sku":"70012938","price":42.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__88584.jpg?v=1722294895"},{"product_id":"carr-lane-sf-112-12-1-1024-1-3-4-od-x-3-4-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-12-1.1024 | 1-3\/4\" OD x 3\/4\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774135247149,"sku":"70011924","price":42.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__99627.jpg?v=1722294899"},{"product_id":"carr-lane-sf-112-12-1-1094-1-3-4-od-x-3-4-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-12-1.1094 | 1-3\/4\" OD x 3\/4\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774135279917,"sku":"70012568","price":42.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__57036.jpg?v=1722294904"},{"product_id":"carr-lane-sf-112-12-1-1250-1-3-4-od-x-3-4-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-12-1.1250 | 1-3\/4\" OD x 3\/4\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774135312685,"sku":"70013279","price":42.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__47422.jpg?v=1722294909"},{"product_id":"carr-lane-sf-112-12-1-1406-1-3-4-od-x-3-4-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-12-1.1406 | 1-3\/4\" OD x 3\/4\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774135345453,"sku":"70012435","price":42.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__35881.jpg?v=1722294913"},{"product_id":"carr-lane-sf-112-12-1-1417-1-3-4-od-x-3-4-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-12-1.1417 | 1-3\/4\" OD x 3\/4\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774135378221,"sku":"70011916","price":42.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__72273.jpg?v=1722294917"},{"product_id":"carr-lane-sf-112-12-1-1562-1-3-4-od-x-3-4-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-12-1.1562 | 1-3\/4\" OD x 3\/4\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774135410989,"sku":"70012713","price":42.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__93683.jpg?v=1722294922"},{"product_id":"carr-lane-sf-112-12-1-1719-1-3-4-od-x-3-4-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-12-1.1719 | 1-3\/4\" OD x 3\/4\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774135443757,"sku":"70013247","price":42.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__71791.jpg?v=1722294929"},{"product_id":"carr-lane-sf-112-12-1-1811-1-3-4-od-x-3-4-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-12-1.1811 | 1-3\/4\" OD x 3\/4\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774135836973,"sku":"70011672","price":42.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__18562.jpg?v=1722294934"},{"product_id":"carr-lane-sf-112-12-1-1875-1-3-4-od-x-3-4-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-12-1.1875 | 1-3\/4\" OD x 3\/4\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774135968045,"sku":"70012962","price":42.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__46339.jpg?v=1722294938"},{"product_id":"carr-lane-sf-112-12-1-2031-1-3-4-od-x-3-4-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-12-1.2031 | 1-3\/4\" OD x 3\/4\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774136000813,"sku":"70013215","price":42.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__55336.jpg?v=1722294942"},{"product_id":"carr-lane-sf-112-12-1-2188-1-3-4-od-x-3-4-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-12-1.2188 | 1-3\/4\" OD x 3\/4\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774136033581,"sku":"70012593","price":42.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__73646.jpg?v=1722294946"},{"product_id":"carr-lane-sf-112-12-1-2205-1-3-4-od-x-3-4-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-12-1.2205 | 1-3\/4\" OD x 3\/4\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774136066349,"sku":"70011664","price":42.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__51110.jpg?v=1722294951"},{"product_id":"carr-lane-sf-112-12-1-2344-1-3-4-od-x-3-4-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-12-1.2344 | 1-3\/4\" OD x 3\/4\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774136099117,"sku":"70013199","price":42.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__22905.jpg?v=1722294955"},{"product_id":"carr-lane-sf-112-12-1-2500-1-3-4-od-x-3-4-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-12-1.2500 | 1-3\/4\" OD x 3\/4\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774136787245,"sku":"70013318","price":42.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__01504.jpg?v=1722294959"},{"product_id":"carr-lane-sf-112-12-1-2598-1-3-4-od-x-3-4-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-12-1.2598 | 1-3\/4\" OD x 3\/4\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774136820013,"sku":"70011621","price":42.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__13874.jpg?v=1722294965"},{"product_id":"carr-lane-sf-112-12-1-2656-1-3-4-od-x-3-4-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-12-1.2656 | 1-3\/4\" OD x 3\/4\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774136852781,"sku":"70013183","price":42.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__31726.jpg?v=1722294969"},{"product_id":"carr-lane-sf-112-12-1-2812-1-3-4-od-x-3-4-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-12-1.2812 | 1-3\/4\" OD x 3\/4\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774136885549,"sku":"70012469","price":42.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__30927.jpg?v=1722294973"},{"product_id":"carr-lane-sf-112-12-1-2969-1-3-4-od-x-3-4-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-12-1.2969 | 1-3\/4\" OD x 3\/4\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774136918317,"sku":"70013167","price":42.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__68074.jpg?v=1722294978"},{"product_id":"carr-lane-sf-112-12-1-2992-1-3-4-od-x-3-4-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-12-1.2992 | 1-3\/4\" OD x 3\/4\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774136951085,"sku":"70011613","price":42.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__55094.jpg?v=1722294983"},{"product_id":"carr-lane-sf-112-12-1-3125-1-3-4-od-x-3-4-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-12-1.3125 | 1-3\/4\" OD x 3\/4\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774136983853,"sku":"70012740","price":42.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__04577.jpg?v=1722294987"},{"product_id":"carr-lane-sf-112-12-1-3281-1-3-4-od-x-3-4-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-12-1.3281 | 1-3\/4\" OD x 3\/4\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774137803053,"sku":"70013094","price":42.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__55162.jpg?v=1722294991"},{"product_id":"carr-lane-sf-112-12-1-3386-1-3-4-od-x-3-4-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-12-1.3386 | 1-3\/4\" OD x 3\/4\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774137835821,"sku":"70011586","price":42.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__95892.jpg?v=1722294996"},{"product_id":"carr-lane-sf-112-12-1-3438-1-3-4-od-x-3-4-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-12-1.3438 | 1-3\/4\" OD x 3\/4\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774137934125,"sku":"70013263","price":42.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__11430.jpg?v=1722295000"},{"product_id":"carr-lane-sf-112-12-1-3594-1-3-4-od-x-3-4-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-12-1.3594 | 1-3\/4\" OD x 3\/4\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774138196269,"sku":"70013078","price":42.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__15891.jpg?v=1722295005"},{"product_id":"carr-lane-sf-112-12-1-3750-1-3-4-od-x-3-4-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-12-1.3750 | 1-3\/4\" OD x 3\/4\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774138229037,"sku":"70015016","price":42.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__84483.jpg?v=1722295010"},{"product_id":"carr-lane-sf-112-12-1-3780-1-3-4-od-x-3-4-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-12-1.3780 | 1-3\/4\" OD x 3\/4\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774138261805,"sku":"70011578","price":42.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__90454.jpg?v=1722295014"},{"product_id":"carr-lane-sf-112-12-1-3906-1-3-4-od-x-3-4-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-12-1.3906 | 1-3\/4\" OD x 3\/4\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774138294573,"sku":"70013054","price":42.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__04330.jpg?v=1722295018"},{"product_id":"carr-lane-sf-112-12-1-4062-1-3-4-od-x-3-4-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-12-1.4062 | 1-3\/4\" OD x 3\/4\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774138327341,"sku":"70013231","price":42.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__30849.jpg?v=1722295023"},{"product_id":"carr-lane-sf-112-16-9688-1-3-4-od-x-1-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-16-.9688 | 1-3\/4\" OD x 1\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774138360109,"sku":"70011663","price":39.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__19277.jpg?v=1722295028"},{"product_id":"carr-lane-sf-112-16-9843-1-3-4-od-x-1-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-16-.9843 | 1-3\/4\" OD x 1\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774138392877,"sku":"70012036","price":39.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__92499.jpg?v=1722295032"},{"product_id":"carr-lane-sf-112-16-9844-1-3-4-od-x-1-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-16-.9844 | 1-3\/4\" OD x 1\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774138425645,"sku":"70010722","price":39.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__11903.jpg?v=1722295036"},{"product_id":"carr-lane-sf-112-16-1-0000-1-3-4-od-x-1-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-16-1.0000 | 1-3\/4\" OD x 1\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774138458413,"sku":"70015083","price":39.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__26976.jpg?v=1722295040"},{"product_id":"carr-lane-sf-112-16-1-0156-1-3-4-od-x-1-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-16-1.0156 | 1-3\/4\" OD x 1\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774138884397,"sku":"70013302","price":39.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__48023.jpg?v=1722295045"},{"product_id":"carr-lane-sf-112-16-1-0236-1-3-4-od-x-1-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-16-1.0236 | 1-3\/4\" OD x 1\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774138917165,"sku":"70011987","price":39.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__71418.jpg?v=1722295049"},{"product_id":"carr-lane-sf-112-16-1-0312-1-3-4-od-x-1-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-16-1.0312 | 1-3\/4\" OD x 1\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774138949933,"sku":"70013341","price":39.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__31414.jpg?v=1722295053"},{"product_id":"carr-lane-sf-112-16-1-0469-1-3-4-od-x-1-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-16-1.0469 | 1-3\/4\" OD x 1\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774138982701,"sku":"70012921","price":39.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__97851.jpg?v=1722295057"},{"product_id":"carr-lane-sf-112-16-1-0625-1-3-4-od-x-1-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-16-1.0625 | 1-3\/4\" OD x 1\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774139048237,"sku":"70013391","price":39.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__27745.jpg?v=1722295061"},{"product_id":"carr-lane-sf-112-16-1-0630-1-3-4-od-x-1-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-16-1.0630 | 1-3\/4\" OD x 1\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774139277613,"sku":"70011971","price":39.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__22202.jpg?v=1722295067"},{"product_id":"carr-lane-sf-112-16-1-0781-1-3-4-od-x-1-length-slip-fixed-renewable-bushing","title":"Carr Lane SF-112-16-1.0781 | 1-3\/4\" OD x 1\" Length Slip\/Fixed Renewable Bushing","description":"\u003ch3\u003eSlip\/Fixed Renewable Bushings (SF)\u003c\/h3\u003e\u003cp\u003edrill bushings are replaceable bushings generally used with a liner bushing and lockscrew. Use SF bushings when you expect to replace bushings during the tooling's lifetime, or to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed renewable bushings: one side of SF drill bushings feature a lockscrew recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then rotate to lock in place. S and F types are now obsolete, and combination SF drill bushings will be supplied at no extra charge. \u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eThese replaceable bushings are generally used with a liner bushing and lockscrew.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ApplicationInformation.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"         +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e1-3\/8 to 1-3\/4\"       0\/-0.0003\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\"\u003e1144 Stressproof Steel\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eHeat treated to achieve Rc 62-64 ID hardness\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-Material.jpg\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"border-collapse: collapse; width: auto\" border=\"1\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eLength (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eF Diameter (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eG (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eH (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eJ (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eL (Degree)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eM (Inch)\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003eR (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: auto\"\u003e31\/32–1-13\/32, 25.00-35.00mm\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e2-19\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e3\/16\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e30°\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-41\/64\"\u003c\/td\u003e\n\u003ctd style=\"width: auto\"\u003e1-25\/64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49774139310381,"sku":"70012696","price":39.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/SF1-ProductInformation__50693.jpg?v=1722295071"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/collections\/Renewable_Bushings.png?v=1722431829","url":"https:\/\/allindustrial.mx\/collections\/renewable-bushings.oembed?page=34","provider":"All Industrial Tool Supply Mexico","version":"1.0","type":"link"}