{"title":"Press-Fit Bushings (P)","description":null,"products":[{"product_id":"carr-lane-p-10-12-0292-5-32-od-x-3-4-length-press-fit-bushing","title":"Carr Lane P-10-12-.0292 | 5\/32\" OD x 3\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/32-1\/16, #69-#53, .75-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772900352301,"sku":"70023130","price":45.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__26630.png?v=1722267118"},{"product_id":"carr-lane-p-10-12-0295-5-32-od-x-3-4-length-press-fit-bushing","title":"Carr Lane P-10-12-.0295 | 5\/32\" OD x 3\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/32-1\/16, #69-#53, .75-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772900385069,"sku":"70020536","price":45.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__34363.png?v=1722267122"},{"product_id":"carr-lane-p-10-12-0310-5-32-od-x-3-4-length-press-fit-bushing","title":"Carr Lane P-10-12-.0310 | 5\/32\" OD x 3\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/32-1\/16, #69-#53, .75-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772900516141,"sku":"70023140","price":45.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__89707.png?v=1722267127"},{"product_id":"carr-lane-p-10-12-0312-5-32-od-x-3-4-length-press-fit-bushing","title":"Carr Lane P-10-12-.0312 | 5\/32\" OD x 3\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/32-1\/16, #69-#53, .75-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772900581677,"sku":"70022937","price":45.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__09097.png?v=1722267131"},{"product_id":"carr-lane-p-10-12-0315-5-32-od-x-3-4-length-press-fit-bushing","title":"Carr Lane P-10-12-.0315 | 5\/32\" OD x 3\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/32-1\/16, #69-#53, .75-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772900614445,"sku":"70020527","price":45.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__21832.png?v=1722267136"},{"product_id":"carr-lane-p-10-12-0320-5-32-od-x-3-4-length-press-fit-bushing","title":"Carr Lane P-10-12-.0320 | 5\/32\" OD x 3\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/32-1\/16, #69-#53, .75-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772900679981,"sku":"70023150","price":45.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__87109.png?v=1722267140"},{"product_id":"carr-lane-p-10-12-0330-5-32-od-x-3-4-length-press-fit-bushing","title":"Carr Lane P-10-12-.0330 | 5\/32\" OD x 3\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/32-1\/16, #69-#53, .75-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772900712749,"sku":"70023160","price":45.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__47558.png?v=1722267145"},{"product_id":"carr-lane-p-10-12-0335-5-32-od-x-3-4-length-press-fit-bushing","title":"Carr Lane P-10-12-.0335 | 5\/32\" OD x 3\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/32-1\/16, #69-#53, .75-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772900778285,"sku":"70020517","price":45.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__65524.png?v=1722267149"},{"product_id":"carr-lane-p-10-12-0350-5-32-od-x-3-4-length-press-fit-bushing","title":"Carr Lane P-10-12-.0350 | 5\/32\" OD x 3\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/32-1\/16, #69-#53, .75-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772902220077,"sku":"70023170","price":45.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__08905.png?v=1722267154"},{"product_id":"carr-lane-p-10-12-0354-5-32-od-x-3-4-length-press-fit-bushing","title":"Carr Lane P-10-12-.0354 | 5\/32\" OD x 3\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/32-1\/16, #69-#53, .75-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772902285613,"sku":"70020506","price":45.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__51421.png?v=1722267158"},{"product_id":"carr-lane-p-10-12-0360-5-32-od-x-3-4-length-press-fit-bushing","title":"Carr Lane P-10-12-.0360 | 5\/32\" OD x 3\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/32-1\/16, #69-#53, .75-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772902383917,"sku":"70023180","price":45.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__07526.png?v=1722267164"},{"product_id":"carr-lane-p-10-12-0370-5-32-od-x-3-4-length-press-fit-bushing","title":"Carr Lane P-10-12-.0370 | 5\/32\" OD x 3\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/32-1\/16, #69-#53, .75-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772902482221,"sku":"70023190","price":45.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__33675.png?v=1722267168"},{"product_id":"carr-lane-p-10-12-0374-5-32-od-x-3-4-length-press-fit-bushing","title":"Carr Lane P-10-12-.0374 | 5\/32\" OD x 3\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/32-1\/16, #69-#53, .75-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772902514989,"sku":"70020497","price":45.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__58878.png?v=1722267173"},{"product_id":"carr-lane-p-10-12-0380-5-32-od-x-3-4-length-press-fit-bushing","title":"Carr Lane P-10-12-.0380 | 5\/32\" OD x 3\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/32-1\/16, #69-#53, .75-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772902580525,"sku":"70023200","price":45.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__99162.png?v=1722267177"},{"product_id":"carr-lane-p-10-12-0390-5-32-od-x-3-4-length-press-fit-bushing","title":"Carr Lane P-10-12-.0390 | 5\/32\" OD x 3\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/32-1\/16, #69-#53, .75-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772902613293,"sku":"70023210","price":45.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__76604.png?v=1722267182"},{"product_id":"carr-lane-p-10-12-0394-5-32-od-x-3-4-length-press-fit-bushing","title":"Carr Lane P-10-12-.0394 | 5\/32\" OD x 3\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/32-1\/16, #69-#53, .75-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772902711597,"sku":"70020486","price":45.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__53396.png?v=1722267187"},{"product_id":"carr-lane-p-10-12-0400-5-32-od-x-3-4-length-press-fit-bushing","title":"Carr Lane P-10-12-.0400 | 5\/32\" OD x 3\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/32-1\/16, #69-#53, .75-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772902744365,"sku":"70023220","price":45.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__19612.png?v=1722267191"},{"product_id":"carr-lane-p-10-12-0410-5-32-od-x-3-4-length-press-fit-bushing","title":"Carr Lane P-10-12-.0410 | 5\/32\" OD x 3\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/32-1\/16, #69-#53, .75-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772902940973,"sku":"70023256","price":45.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__86818.png?v=1722267196"},{"product_id":"carr-lane-p-10-12-0413-5-32-od-x-3-4-length-press-fit-bushing","title":"Carr Lane P-10-12-.0413 | 5\/32\" OD x 3\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/32-1\/16, #69-#53, .75-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772902973741,"sku":"70020477","price":45.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__10858.png?v=1722267201"},{"product_id":"carr-lane-p-10-12-0420-5-32-od-x-3-4-length-press-fit-bushing","title":"Carr Lane P-10-12-.0420 | 5\/32\" OD x 3\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/32-1\/16, #69-#53, .75-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772903039277,"sku":"70023266","price":45.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__56008.png?v=1722267205"},{"product_id":"carr-lane-p-10-12-0430-5-32-od-x-3-4-length-press-fit-bushing","title":"Carr Lane P-10-12-.0430 | 5\/32\" OD x 3\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/32-1\/16, #69-#53, .75-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772903072045,"sku":"70023276","price":45.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__67803.png?v=1722267210"},{"product_id":"carr-lane-p-10-12-0433-5-32-od-x-3-4-length-press-fit-bushing","title":"Carr Lane P-10-12-.0433 | 5\/32\" OD x 3\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/32-1\/16, #69-#53, .75-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772903170349,"sku":"70020465","price":45.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__54039.png?v=1722267214"},{"product_id":"carr-lane-p-10-12-0453-5-32-od-x-3-4-length-press-fit-bushing","title":"Carr Lane P-10-12-.0453 | 5\/32\" OD x 3\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/32-1\/16, #69-#53, .75-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772903235885,"sku":"70020456","price":45.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__81418.png?v=1722267219"},{"product_id":"carr-lane-p-10-12-0465-5-32-od-x-3-4-length-press-fit-bushing","title":"Carr Lane P-10-12-.0465 | 5\/32\" OD x 3\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/32-1\/16, #69-#53, .75-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772903301421,"sku":"70023286","price":45.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__60146.png?v=1722267223"},{"product_id":"carr-lane-p-10-12-0469-5-32-od-x-3-4-length-press-fit-bushing","title":"Carr Lane P-10-12-.0469 | 5\/32\" OD x 3\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/32-1\/16, #69-#53, .75-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772903366957,"sku":"70021874","price":45.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__36530.png?v=1722267228"},{"product_id":"carr-lane-p-10-12-0472-5-32-od-x-3-4-length-press-fit-bushing","title":"Carr Lane P-10-12-.0472 | 5\/32\" OD x 3\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/32-1\/16, #69-#53, .75-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772903432493,"sku":"70020447","price":45.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__00052.png?v=1722267232"},{"product_id":"carr-lane-p-10-12-0492-5-32-od-x-3-4-length-press-fit-bushing","title":"Carr Lane P-10-12-.0492 | 5\/32\" OD x 3\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/32-1\/16, #69-#53, .75-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772903465261,"sku":"70020437","price":45.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__12599.png?v=1722267236"},{"product_id":"carr-lane-p-10-12-0512-5-32-od-x-3-4-length-press-fit-bushing","title":"Carr Lane P-10-12-.0512 | 5\/32\" OD x 3\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/32-1\/16, #69-#53, .75-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772904055085,"sku":"70020427","price":45.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__31964.png?v=1722267240"},{"product_id":"carr-lane-p-10-12-0520-5-32-od-x-3-4-length-press-fit-bushing","title":"Carr Lane P-10-12-.0520 | 5\/32\" OD x 3\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/32-1\/16, #69-#53, .75-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772904087853,"sku":"70023296","price":36.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__91745.png?v=1722267245"},{"product_id":"carr-lane-p-10-12-0531-5-32-od-x-3-4-length-press-fit-bushing","title":"Carr Lane P-10-12-.0531 | 5\/32\" OD x 3\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/32-1\/16, #69-#53, .75-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772904972589,"sku":"70020409","price":36.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__82209.png?v=1722267249"},{"product_id":"carr-lane-p-10-12-0550-5-32-od-x-3-4-length-press-fit-bushing","title":"Carr Lane P-10-12-.0550 | 5\/32\" OD x 3\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/32-1\/16, #69-#53, .75-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772905005357,"sku":"70023313","price":36.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__58464.png?v=1722267254"},{"product_id":"carr-lane-p-10-12-0551-5-32-od-x-3-4-length-press-fit-bushing","title":"Carr Lane P-10-12-.0551 | 5\/32\" OD x 3\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/32-1\/16, #69-#53, .75-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772905070893,"sku":"70020392","price":36.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__91575.png?v=1722267258"},{"product_id":"carr-lane-p-10-12-0571-5-32-od-x-3-4-length-press-fit-bushing","title":"Carr Lane P-10-12-.0571 | 5\/32\" OD x 3\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/32-1\/16, #69-#53, .75-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772905103661,"sku":"70020375","price":36.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__57812.png?v=1722267262"},{"product_id":"carr-lane-p-10-12-0591-5-32-od-x-3-4-length-press-fit-bushing","title":"Carr Lane P-10-12-.0591 | 5\/32\" OD x 3\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/32-1\/16, #69-#53, .75-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772905234733,"sku":"70020358","price":36.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__58253.png?v=1722267267"},{"product_id":"carr-lane-p-10-12-0595-5-32-od-x-3-4-length-press-fit-bushing","title":"Carr Lane P-10-12-.0595 | 5\/32\" OD x 3\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/32-1\/16, #69-#53, .75-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772905300269,"sku":"70023330","price":36.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__75387.png?v=1722267271"},{"product_id":"carr-lane-p-10-12-0610-5-32-od-x-3-4-length-press-fit-bushing","title":"Carr Lane P-10-12-.0610 | 5\/32\" OD x 3\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/32-1\/16, #69-#53, .75-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772905464109,"sku":"70020341","price":36.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__05302.png?v=1722267275"},{"product_id":"carr-lane-p-10-12-0625-5-32-od-x-3-4-length-press-fit-bushing","title":"Carr Lane P-10-12-.0625 | 5\/32\" OD x 3\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/32-1\/16, #69-#53, .75-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772906086701,"sku":"70022947","price":36.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__63978.png?v=1722267279"},{"product_id":"carr-lane-p-10-4-0135-5-32-od-x-1-4-length-press-fit-bushing","title":"Carr Lane P-10-4-.0135 | 5\/32\" OD x 1\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772906119469,"sku":"70022990","price":43.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__64315.png?v=1722267283"},{"product_id":"carr-lane-p-10-4-0138-5-32-od-x-1-4-length-press-fit-bushing","title":"Carr Lane P-10-4-.0138 | 5\/32\" OD x 1\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772906185005,"sku":"70020628","price":43.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__49838.png?v=1722267288"},{"product_id":"carr-lane-p-10-4-0145-5-32-od-x-1-4-length-press-fit-bushing","title":"Carr Lane P-10-4-.0145 | 5\/32\" OD x 1\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772906414381,"sku":"70023024","price":43.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__37994.png?v=1722267292"},{"product_id":"carr-lane-p-10-4-0150-5-32-od-x-1-4-length-press-fit-bushing","title":"Carr Lane P-10-4-.0150 | 5\/32\" OD x 1\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772906479917,"sku":"70020618","price":43.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__53302.png?v=1722267297"},{"product_id":"carr-lane-p-10-4-0156-5-32-od-x-1-4-length-press-fit-bushing","title":"Carr Lane P-10-4-.0156 | 5\/32\" OD x 1\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772906709293,"sku":"70022904","price":43.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__85689.png?v=1722267301"},{"product_id":"carr-lane-p-10-4-0157-5-32-od-x-1-4-length-press-fit-bushing","title":"Carr Lane P-10-4-.0157 | 5\/32\" OD x 1\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772907168045,"sku":"70020610","price":43.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__84213.png?v=1722267306"},{"product_id":"carr-lane-p-10-4-0160-5-32-od-x-1-4-length-press-fit-bushing","title":"Carr Lane P-10-4-.0160 | 5\/32\" OD x 1\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772907266349,"sku":"70023032","price":43.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__08348.png?v=1722267310"},{"product_id":"carr-lane-p-10-4-0165-5-32-od-x-1-4-length-press-fit-bushing","title":"Carr Lane P-10-4-.0165 | 5\/32\" OD x 1\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772907397421,"sku":"70020602","price":43.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__24940.png?v=1722267315"},{"product_id":"carr-lane-p-10-4-0177-5-32-od-x-1-4-length-press-fit-bushing","title":"Carr Lane P-10-4-.0177 | 5\/32\" OD x 1\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772907495725,"sku":"70020594","price":43.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__14019.png?v=1722267320"},{"product_id":"carr-lane-p-10-4-0180-5-32-od-x-1-4-length-press-fit-bushing","title":"Carr Lane P-10-4-.0180 | 5\/32\" OD x 1\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772907659565,"sku":"70023040","price":43.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__28553.png?v=1722267325"},{"product_id":"carr-lane-p-10-4-0189-5-32-od-x-1-4-length-press-fit-bushing","title":"Carr Lane P-10-4-.0189 | 5\/32\" OD x 1\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772908413229,"sku":"70020586","price":43.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__90055.png?v=1722267329"},{"product_id":"carr-lane-p-10-4-0197-5-32-od-x-1-4-length-press-fit-bushing","title":"Carr Lane P-10-4-.0197 | 5\/32\" OD x 1\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772908871981,"sku":"70020577","price":43.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__36928.png?v=1722267334"},{"product_id":"carr-lane-p-10-4-0200-5-32-od-x-1-4-length-press-fit-bushing","title":"Carr Lane P-10-4-.0200 | 5\/32\" OD x 1\/4\" Length Press-Fit Bushing","description":"\u003ch3\u003ePress-Fit Bushings (P)\u003c\/h3\u003e\u003cp\u003eP style drill bushings are the most-popular and least-expensive type of drill bushing. Type P bushings are permanently pressed into the jig plate, usually flush with the top surface. P style drill bushings are generally used for single-operation drilling or reaming, when you do not expect to replace bushings during the tooling's lifetime. Type P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.\u003c\/p\u003e\u003ch3\u003eApplication Information\u003c\/h3\u003e\u003cp\u003eP bushings are permanently pressed into the jig plate, usually flush with the top surface.\u003c\/p\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ApplicationInformation.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3\u003eID Tolerance\u003c\/h3\u003e\u003cb\u003eStandard ID Tolerance:\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0001\/+0.0004\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0001\/+0.0005\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0002\/+0.0006\u003c\/p\u003e\u003cp\u003eOver 1-1\/2 and up     +0.0003\/+0.0007\u003c\/p\u003e\u003cb\u003eReamer ID Tolerance (Special):\u003c\/b\u003e\u003cp\u003eFrom #80 to 1\/4\"          +0.0005\/+0.0008\u003c\/p\u003e\u003cp\u003eOver 1\/4 to 3\/4\"            +0.0006\/+0.0010\u003c\/p\u003e\u003cp\u003eOver 3\/4 to 1-1\/2\"        +0.0008\/+0.0012\u003c\/p\u003e\u003ch3\u003eOD Tolerance\u003c\/h3\u003e\u003cb\u003eStandard OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"        +0.0016\/+0.0012\u003c\/p\u003e\u003cb\u003eUnground OD Tolerance:\u003c\/b\u003e\u003cp\u003e5\/32 to 13\/64\"          +0.010\/+0.005\u003c\/p\u003e\u003ch3\u003eNo-Counterbore Option on Long Bushings\u003c\/h3\u003e\u003cp\u003eExtremely long bushings with a small ID size are counterbored according to ANSI standards for proper drill-bearing length to eliminate binding and heat buildup. Add \"-NCB\" for applications that require these bushings without a counterbore.\u003c\/p\u003e\u003ch3\u003eMaterial\u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treat\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eDFARS\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1144 Stressproof steel\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eHeat Treated to achieve Rc 62-64 ID Hardness\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-Material.webp\" alt=\"\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\u003ch3 dir=\"ltr\"\u003eParts Specification\u003c\/h3\u003e\u003ctable style=\"height: 75px; width: 75%; border-collapse: collapse;\" border=\"1\" cellspacing=\"5\" cellpadding=\"5\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eStandard Drill Sizes (mm)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eOD (Inch)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eLength (Inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/64-1\/16, #80-#53, .35-1.60mm\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/32\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003c!-- pagebreak --\u003e\u003c\/p\u003e","brand":"Carr Lane","offers":[{"title":"Default Title","offer_id":49772908937517,"sku":"70023048","price":43.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/files\/P-10-ProductInformation__69689.png?v=1722267339"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/7223\/2237\/collections\/Press-Fit_Bushings_P.png?v=1722432037","url":"https:\/\/allindustrial.mx\/collections\/press-fit-bushings-p.oembed?page=38","provider":"All Industrial Tool Supply Mexico","version":"1.0","type":"link"}